# Pool Table Markings?

Pool table markings may refer to the sights, also called diamonds because of their shape, are inlaid at exact, evenly spaced spots along the rails of some pool tables. The help players to be able to take correct aim when aiming bank shots or kick shots. There are seven diamonds along each long rail and three along each short rail. Many books have been written concerning the geometric and algebraic systems of aiming and angles to get the best shots using the diamonds.
Reference:
Q&A Related to "Pool Table Markings?"
 1. Find the pool table's center line. Use the tape measure to determine the width of the table. Use a piece of chalkboard chalk to mark the center point with a dot. 2. Measure the http://www.ehow.com/how_6620778_mark-measurements-...
 The first thing you'll do to recover a pool table is remove any trim items from the table and tear the old felt off the slate. Unfold the new felt and cut it to the proper size. Leave http://answers.ask.com/Home/Gardening/how_to_recov...
 What you will need to be able to do is reach the very edges of your slate (bed of your table). The best way to show the markings required is with a diagram, below is a small version http://wiki.answers.com/Q/Marking+for+8+foot+pool+...
 If you are confounded by how to move a pool table, you are not alone. If you're moving a pool table either out of your house or into another part of it you should consider hiring http://www.life123.com/hobbies/games/billiards/how...
Top Related Searches
Explore this Topic
It is fairly easy to mark out a pool table that is constructed according to specifications. The average height of the table should be 29 ¼ inches (74.29cm ...
To mark any pool table(as they vary by manufacturer in exact size,first measure the width of the slate then half this measurement. This is the spot mark, (which ...
You'll want to have those dots in the correct spot so you can make your angle shots. You'll need a tape measure, marker pencil or pen, pool table D marking stick ...