Pressure washer troubleshooting coleman?

Answer

In order to troubleshoot your Coleman pressure washer, you should first determine the problem that you are having with it. By doing this, you are able to determine the root cause of the problem. Pressure washers can having many issues such as the loss of pressure, power, and force. Troubleshooting these types of problems are often done by flushing the lines of the washer, as they are most likely clogged and inhibiting the performance of the washer.
Reference:
Q&A Related to "Pressure washer troubleshooting coleman?"
1. Fill the tank with gasoline and add oil if it is low if your engine will not start. Also, slide your choke lever to the "choke" position and move the throttle to "
http://www.ehow.com/how_7833123_troubleshoot-karch...
The operators manual is right here: http://www.colemanpowermate.com/pressure….
http://answers.yahoo.com/question/index?qid=100603...
Repair leaky hoses if you experience low pressure. In particular, look at the connections. Teflon tape is used on Shark pressure washers at the connections. Simply re-tape. Undo the
http://www.ehow.co.uk/m/how_6557673_troubleshoot-s...
Explore this Topic
1. Clear the nozzle of dirt and debris if the pump isn't providing enough water pressure. First, turn the engine off and switch off the water supply. Press the ...
1. Ensure that you are using the correct pressure nozzle and that is not blocked or damaged. Clear any blockage or replace the nozzle if damaged. 2. Check if the ...
1. Fill the tank with gasoline and add oil if it is low if your engine will not start. Also, slide your choke lever to the "choke" position and move ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014 Ask.com