How to Enclose Romex Wiring?


If you are doing a wiring project and using Romex wiring, it is fairly easy to enclose it so that there is no chance of exposure. There are two ways to do this. You can either run the wiring through metal conduit pipe or through flexible wire casing. Either way should safely enclose the wires.
Q&A Related to "How to Enclose Romex Wiring?"
1. Identify the wiring you wish to replace. Cut the power to the area or the whole house. Test with a tester to ensure the area's power is dead. Remove the old wire from the panel
ROMEX® is a federally registered trademarked brand of non-metallic sheathed electrical cable originally developed by the former Rome Wire Company in 1922. The ROMEX Brand is now
Robert Wilber. Licensed Philadelphia Electrician. Philadelphia License # 3516 - 16765. * Non-metallic sheathed cable [Romex is a brand name, like Kleenex . is an acceptable wiring
put a wire nut on it, if you are only using 120 volts.
1 Additional Answer Answer for: romex wire
Explore this Topic
Romex wire is a type of wire that is made of non-metallic sheathed electrical cable or wiring in plastic coating. The Romex brand originated in 1922 and was developed ...
The 6 gauge Romex wire is normally used for a 120/240 circuit. The Romex wire is normally accessible in several configurations such as the 10, 12, and 14 gauge ...
For an electric stove, with a 40 amp breaker, you would need an 8-3 Romex wire. Most electric stoves have a 50 amp breaker and would require a 6-3 Romex wire. ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014