How do I clean an RV awning?


The best thing to clean an RV awning with is a mixture of Pinesol and water. You want to mix 1/2 cup of Pinesol with 2 gallons of hot water in a bucket. Then, you want to scrub it with a brush. When you are done, you want to make sure that you rinse it very good because if the Pinesol dries on there, it will leave a residue.
Q&A Related to "How do I clean an RV awning?"
1. Mix 1/4 cup of dish soap and 1/4 cup of bleach with 5 gallons of water. 2. Extend the awning. Apply the mixture to the top of the awning with a clean sponge. 3. Retract the awning
bleach and warm water it's just like plasic so you can just. RINSE IT OFF!
If totally unwound, you put 12-1/2 turns on them. You want to really be careful. I use two devices to lock in place as I position for each turn. I really advise against doing this
If you have some, try WD-40 before you go out and buy something special. You'll
1 Additional Answer Answer for: rv awning cleaning
RV Awning Cleaning Tips
RV awnings are made of vinyl or acrylic fabric, which are durable materials but not indestructible. When using your awning, always let it dry completely before retracting it after being in humid or wet conditions. Damp vinyl will mildew if it is not... More »
Difficulty: Easy
Explore this Topic
To clean canvas awnings, you need to use a soft bristle brush, water hose, sponge, a ladder to reach the awnings and mild detergent. You may also need plastic ...
To light an RV Oven, Clean the RV oven before lighting it, Turn the gas on that flows to the oven, Push the pilot light's control as you grasp a lit match exact ...
Prepare a metal awning for painting by thoroughly cleaning it of debris, sanding it and removing any mildew or mold present. Tape the edges of the awning to avoid ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014