How can I adjust the toilet water level?

Answer

Adjusting the toilet water level involves adjusting the float valve. This valve regulates water flow into the tank to ensure the water level is at the best level for optimal toilet flushing. There are two primary float valve types — concentric valve type and the ball-cock valve type — both of which require the removal of the tank cover to gain access.

To adjust a ball-cock toilet, push the ball float down and use the rod's inner end adjustment screw to alter the water flow if water is running. Go to the top of the valve and turn the vertical adjuster screw. Turn the screw one full rotation while lifting the ball and until the water stops running, let the ball float. Flush the toilet, and observe the water level and the flush power to determine if further adjustment is necessary.

To adjust a concentric valve toilet, identify the concentric float by flushing the toilet. At the adjustment rod's upper end, there is a small nut that has to be loosened. On average, just two to three rotations is adequate. Observe the flush power and the water level by flushing the toilet. If the water level is not desirable, simply repeat the process until it is.

Reference:
Q&A Related to "How can I adjust the toilet water level?"
1. Carefully remove the lid of the toilet. Set it aside so it won't get cracked or damaged. 2. Locate the screw where the metal arm meets the water valve. 3. Loosen the screw with
http://www.ehow.com/how_7921256_adjust-water-level...
If you have a ball on the end of a rod in the tank, most people just bend the rod a little bit to lower the water level. If you have the fill valve that is in the corner and has a
http://wiki.answers.com/Q/Where_do_you_adjust_wate...
first thing, locate some landmarks. The overflow tube: This tube extends upwards from the bottom of the tank (also called a cistern) NEAR to the flapper valve at the bottom center
http://answers.yahoo.com/question/index?qid=200907...
Please make sure the water is off! the fluid master has a slip ring at the bottom of the float base it pulls up then you can adjust the float up or, down and, snap it back down. at
http://www.fixya.com/support/t5431018-adjust_water...
1 Additional Answer
Ask.com Answer for: toilet water level adjusting
How to Adjust Toilet Water Level
If your toilet just doesn't have the power that it used to, you may need to adjust the toilet water level. When you press the lever on the handle, it lifts up a flush valve. Water then rushes out of the toilet and into the toilet bowl to carry away the... More »
Difficulty: Moderately Easy
Source: www.ehow.com
Explore this Topic
To adjust the water level in a toilet bowl, you have to set the height at which the float shuts off the water valve. You can do this by adjusting the screw where ...
There are several ways to adjust the water level in a toilet tank. One method is to use a brick. The brick is placed in the cistern, or water tank of the toilet. ...
There is only so much water that can fit into the toilet bowl. If yours is not up to the proper level, you will need to adjust the water in the tank itself. ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014 Ask.com