What are light sensors used for?

Answer

Light sensors may be used in burglar alarms or inside garage door openers. Light shines between sensors, and if the something interrupts the light, the device knows an object’s there. In addition, they are also used in street lights to determine when it's dark enough for the light to switch on.

In the case of a burglar alarm, the light sensor constantly senses a beam of light from another part of the alarm. If a person or object gets in the way of the beam, the sensor knows senses the change in light and immediately sound the alarm. Garage door devices need a similar set up in order to make sure they don’t close on top of an object. If the light bouncing back from the ground is interrupted, then the garage door doesn't close to prevent damage.

Bar code scanners also use light sensor technology. The light in the scanner reflects on bar code, and then a sophisticated light sensor inside picks up on the patterns of light to translate the code into numbers and other data. Motion-sensing devices often have light sensors in them as well. Human beings give off infrared light, and many businesses use infrared sensors to automatically open their doors when someone approaches. A number of motion-sensing lights also use this approach.

Q&A Related to "What are light sensors used for?"
Light sensors are devices that are designed to detect light. There are several different types and styles of light sensors, each of them unique and having their own specific and useful
http://wiki.answers.com/Q/What_are_light_sensors_u...
1. Decide on the light that will be controlled by the motion sensor, for example, a light on a lighting fixture in the living room or den. Trip the fuse at the fuse box controlling
http://www.ehow.com/how_8164406_use-sensor-control...
Inductive sensing—the filled-in cut you see in the road surface is where a loop of wire was embedded, and the inductance changes when there is a lot of metal nearby. Embed Quote
http://www.quora.com/What-type-of-sensor-is-used-t...
Argon is classified as a noble gas on the periodical table. Argon, listed as "Ar" on the periodic table, comes from the Greek word meaning "inactive. Long before argon
http://www.ehow.com/how-does_4966200_how-argon-use...
Explore this Topic
To wire a light sensor, first switch off the power supply, then pull the fixture wires through the silver plate of the new fixture and connect it to the supply ...
If your motion sensor light doesn't work it could be that the sensor has gone bad in the light. You should first try replacing the bulbs in the light to see if ...
Position far from the sensor so it does not turn on. Walk toward the sensor until the light activates to determine its range and direction. twist the face of the ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014 Ask.com