What are the timing marks for a 1990 ford ranger with a 2.3 engine?

Answer

You need to line up the camshaft & crankshaft pulleys. There is a plug in the cam belt cover so you can check for the marks. Check the camshaft timing without removing the cover. Set the crankshaft to TDC by aligning the mark on the crank pulley with the TDC mar on the belt cover. There is an access hole you can look thru to in the belt cover to see the markings for the correct spot.
Q&A Related to "What are the timing marks for a 1990 ford ranger..."
1. Use a flashlight to find the automatic tensioner that keeps a constant tension on the drive belt. Rotate the tensioner counterclockwise and lift it off the belt. 2. Remove the
http://www.ehow.com/how_7997908_change-ranger-23-l...
2 marks lined up
http://wiki.answers.com/Q/What_is_the_timing_mark_...
i believe crank dot up,and cam dot up,if it pops then pull off the distributor cap and relocate the wires 180 degrees in the direction the rotor turns
http://www.fixya.com/cars/t3912985-align_timing_ma...
There are 4 spark plugs on a
http://www.chacha.com/question/how-many-spark-plug...
Explore this Topic
1. Use a flashlight to find the automatic tensioner that keeps a constant tension on the drive belt. Rotate the tensioner counterclockwise and lift it off the ...
The ignition timing on the 1984 Ford Ranger is : 2.0 L - 4 cylinder - ( 8 degrees BTDC ) 2.3 L - 4 cylinder engine - ( 6 degrees BTDC ) 2.8 L - V6 engine - ( 10 ...
1. Put on safety glasses and work gloves. Lift the hood and prop it open. Clean any dirt and grime build-up from the quick-disconnect fitting using spray parts ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014 Ask.com