What Is the Correct Way of Using a Dial Test Indicator?

Answer

The proper way to use a Dial Test Indicator is to set the tool in the right position on the intended part in line with the bed of the lathe or the mill, then mount it on the magnetic base. Secondly, turn it on and adjust the swivel arm to place the appropriate tip on the indicator point onto the part then set the bezel to zero. Lastly lock the bezel in place by tightening the screw on the top of the indicator then count the revolutions on the dial indicator after rotating the lathe or mil jaw.
Q&A Related to "What Is the Correct Way of Using a Dial Test..."
1. Attach the dial test indicator to the magnetic base. Refer to the magnetic stand usage manual to determine the correct procedure for horizontally mounting the dial test indicator
http://www.ehow.com/how_6558590_use-dial-test-indi...
Sit on the toilet. Place the test stick in your urine
http://www.chacha.com/question/what-is-the-correct...
Attach the dial test indicator to the magnetic base. Refer to the magnetic stand usage manual to determine the correct procedure for horizontally mounting the dial test indicator.
http://www.ehow.co.uk/m/how_6558590_use-dial-test-...
Explore this Topic
To use a dial test indicator, first place the device on the spot of the part to be measured. Then, scale the dial indicator, turn it on and adjust the swivel arm ...
The way to know the best type of pregnancy test for you to take is to look at the indications on the package of the level oh hCG it detects. From my experience ...
Vertically insert the strip into your urine for 5 seconds lay strip flat on a clean dry surface (non absorbent). Do not allow urine level to exceed the line indicated ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014 Ask.com