Tweet
What is the Purpose of a Clutch Slave Cylinder?
Answer
The clutch slave cylinder is a control device that converts non-hydraulic pressure into hydraulic pressure, in order to move other device which are located at the other end of the hydraulic system, such as one or more slave cylinders.
Q&A Related to "What is the Purpose of a Clutch Slave Cylinder"
|
1. Raise and support the vehicle on jack stands. Place the drip pan under the slave cylinder. Remove the hydraulic line by unscrewing the line plug with a wrench. It's usually a 10mm
http://www.ehow.com/how_5117251_install-clutch-sla...
|
|
1. Lift and support the vehicle using a jack and jack stands. Locate the jack stand on the frame but out of the way of your work area. Every year, people are injured or killed by
http://www.ehow.com/how_5759209_change-clutch-slav...
|
|
1. Raise and support the front of the vehicle on jack stands. Remove the hydraulic line on the clutch slave cylinder using a wrench. Turn the line cap counterclockwise. 2. Remove
http://www.ehow.com/how_5329346_replace-clutch-sla...
|
|
1. Park the vehicle on a level paved surface. Set the parking brake. Raise the front of the vehicle with a jack and support with jack stands. 2. Place a drain pan under the slave
http://www.ehow.com/how_7906194_rebuild-clutch-sla...
|
Similar Questions
People Also Asked
Wikipedia on Ask.com
A clutch is a machine that provides for the power transmission (and therefore usually motion) from one component (the driving member) to another (the driven...
Top Related Searches
Explore this Topic
A clutch slave cylinder is a tool used in the hydraulic clutch system. It is usually mounted in the transmission, either on the outside, or in the inside. It can ...
A clutch slave cylinder is a device used in the hydraulic clutch system. To install it, have the vehicle on the jack for support. Place the drip pan under the ...
1. Lift and support the vehicle using a jack and jack stands. Locate the jack stand on the frame but out of the way of your work area. Every year, people are injured or killed by not following simple safety procedures like this one. 2. Remove the lin ...