Why is my washer leaking as it fills?

Answer

Causes of top load washer leaks are a clogged or tilted overflow tube, an improperly secured drain hose, loose connections at the fill hoses, or a hole in the water pump, according to About.com. Causes of front load washer leaks include oversudsing, a punctured door seal and an improperly closed door.

A person should ensure that the washer is level before tackling a leaking problem, notes About.com. A clogged overflow tube occurs due to oversudsing, which results from using too much detergent or mixing laundry products inappropriately. Oversudsing commonly happens in homes with a water softening system, as softer water requires only a small amount of detergent for effective cleaning. A hose that is not properly secured in the drainpipe can cause a leak at the back of the washer. It is important to insert the hose fully into the standpipe to stop the leak. If the culprit is a loose connection at the fill hoses, they should be replaced if they are not in good shape.

A leak under the washer is possibly caused by a hole in the water pump, in which case the pump should be replaced to prevent water from reaching the motor, states About.com. If the door seal on a front load washer has plenty of soil and soap, the seal can cause a leak at the front of washer. A person should clean the gasket weekly and check for punctures or trapped items.

Reference:
Q&A Related to "Why is my washer leaking as it fills?"
If the seal around the door of your washing machine is obstructed, water can be pushed through it when your wash agitates. Drain the water from your machine, and inspect the seal
http://www.ehow.com/info_12140077_washer-leaks-agi...
beacase it does.
http://wiki.answers.com/Q/Why_does_my_washer_fill_...
A leaking roof is the most obvious sign that it's time to replace your roof, but it's hardly the only one. Many of these signs will eventually lead to a leaking roof, but identifying
http://www.life123.com/home-garden/building-renova...
Hoses. Check the hoses and rubber washers for a leak. Turn off one valve at a time and check for puddling. This can help determine which side (hot or cold) is leaking. Then simply
http://answers.yahoo.com/question/index?qid=200912...
Explore this Topic
An overflow pipe could be leaking as a result of the ballcock not properly shutting off the valve to the main water tank. A damaged float valve or a worn washer ...
The most commonly reported problems with LG washing machines are an unusual odor, the washer filling too slowly, leaking and motor failure. Error codes are used ...
A Maytag top-load washer fails to fill with water for a variety of reasons, including closed water valves, kinked hoses and dirty valve screens, according to the ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014 Ask.com