Why Is the Water Level in My Toilet Bowl Falling?


A receding level of water in the toilet bowl is an indication of damage or a problem in one of the toilet parts, notably, the bowl, the flapper valves and the seals. The toilet bowl could be cracked at the bottom or the seals (wax bowl rings) could be loose causing water to seep to the floor. If the level of water in the toilet bowl is falling because of the flapper valve, the valve has to be replaced.
Q&A Related to "Why Is the Water Level in My Toilet Bowl Falling"
When your toilet fills up after being flushed, the flapper valve allows water to drain into the tank. If the water level falls after the bowl fills up, this valve is probably the
Please don't tell me you already dropped a deuce in there after you bought it and before you hooked it up to the water supply. :O.
Attached to the fill valve should be a small diameter plastic tube, the other end goes into the overflow tube to fill the bowl.
A low water level in a bowl can also be caused if the toilet is not properly
2 Additional Answers
Ask.com Answer for: why is the water level in my toilet bowl falling
Why Is the Water Level in My Toilet Bowl Falling?
If your toilet bowl water level is receding, there is damage to one of the components in the toilet itself. This is a common problem and it is an easy fix as long as you know how to solve it and what to look for. It concerns either the flapper valve... More »
Difficulty: Easy
Source: www.ehow.com
The water level in you toilet bowl could be falling because the water is leaking out. This most like means there is a problem with flapper valve that needs to be replaced.
Explore this Topic
A toilet bowl's water level directly reflects the water level in the tank. The flush and fill devices are located in the tank. The fill device determines usage ...
There is only so much water that can fit into the toilet bowl. If yours is not up to the proper level, you will need to adjust the water in the tank itself. ...
To adjust the water level in a toilet bowl, you have to set the height at which the float shuts off the water valve. You can do this by adjusting the screw where ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014 Ask.com