Topic: Copper Fittings
Not finding your answer? Try searching the web for Copper Fittings
Answers to Common Questions
How to Disassemble Copper Fittings
A joint is made in copper pipe and copper fittings by soldering them together. This proces is called sweating copper. A joint made in this manner will last indefinitely. But just because the solder is cool does not mean that this joint is p... Read More »
Source: http://www.ehow.com/how_4964795_disassemble-copper-fittings.html
How to Resolder Copper Fittings
Most plumbing fixture tubes and fittings are either PVC or copper. While PVC requires a special glue to adhere two pieces together, copper is soldered together. Soldering is the process where metal wire is melted into place along the connec... Read More »
Source: http://www.ehow.com/how_5553299_resolder-copper-fittings.html
How to Solder Copper Fittings
Ok so you have 2 pipes you need to connect, you have added a cut off valve, water hammer reducer, etc. Whatever you need to add in, you want to get the right fittings and measure it out. Either cut out the old pipe according to the measurem... Read More »
Source: http://www.ehow.com/how_5086627_solder-copper-fittings.html
Featured Content:
Copper Fittings
More Common Questions
Answers to Other Common Questions
Shine the sides of the pipe if you haven't done that already. Use steel wool and make sure it shines like new copper. Remove any burrs that might make cause problems. Make certain that the end of the pipe is smooth so it can fit snugly agai...
Read More »
Source: http://www.ehow.com/how_2293275_fit-copper-pipes.html
Copper pipe fittings, whether couplings (copper joints that attach one piece of copper pipe to another) or shutoff valves, require installation by soldering. The process of preparing and soldering the fittings is fairly easy, but can become...
Read More »
Source: http://www.ehow.com/how_6517567_solder-copper-pipe-fittings.html?...
Sweating copper tubing is not rocket science, although it does work under some fairly technical principles. Basically, it works on "capillary-action", where the heat applied with a torch or other heating tool 'pulls' the solder material tow...
Read More »
Source: http://www.ehow.com/how_2084180_sweat-copper-tubing-fittings.html
Copper fittings are made for bends and turns in the pipe or to join or branch copper pipes. If the copper fitting becomes damaged, either through rust or leaks, the only repair possible is to replace the damaged section. Replacing the pipes...
Read More »
Source: http://www.ehow.com/how_6152308_repair-copper-pipe-fittings.html?...
Copper is generally considered the best material for plumbing in homes and commercial buildings. Copper has special characteristics and thus requires specific methods for joining the tubing and fittings. Many times copper fittings are joine...
Read More »
Source: http://www.ehow.com/how_5557561_tighten-threaded-copper-fittings....
Using pressure fittings will eliminate the need for soldering pipes. This comes in handy when you do not want to deal with the flame and dangers of soldering the traditional way. The seal is just as good as a traditional solder, but using a...
Read More »
Source: http://www.ehow.com/how_4813398_use-copper-pressure-fittings.html
