Topic: EGR Solenoid
Answers to Common Questions
What Is an EGR Solenoid Malfunction?
An EGR switch consists of a valve, vacuum and solenoid. When a vehicle's combustion temperature rises above 2500 degrees, the EGR valve opens and the vacuum draws in exhaust to help balance out harmful emissions. The EGR solenoid controls t... Read More »
Source: http://www.ehow.com/facts_7225011_egr-solenoid-malfunction_.html?...
How to Test an EGR Vacuum Solenoid
Your vehicles EGR valve is a crucial component in the vehicle's exhaust system. The EGR valve controls the amount of exhaust reintroduced into the engine, thus reducing the vehicles emissions. A failed EGR valve can cause decreased power an... Read More »
Source: http://www.ehow.com/how_7551971_test-egr-vacuum-solenoid.html?ref...
How an EGR Vacuum Solenoid Works
EGR (Exhaust Gas Recirculation) The EGR is an exhaust gas recirculation device used for the purpose of lowering emissions. The purpose of the EGR is to allow a certain amount of exhaust to return and be mixed with the incoming fuel into the... Read More »
Source: http://www.ehow.com/how_4913647_how-egr-vacuum-solenoid-works.htm...
Featured Content: EGR Solenoid
An exhaust gas recirculation (EGR) solenoid is part of a motor vehicle which regulates when engine vacuums should or should not turn on by controlling how much the EGR valve opens. It ensures the engine runs… More »
Source: www.ehow.com
Answers to Other Common Questions
Test for EGR solenoid valve I have a 95 Altima. I tested the EGR solenoid valve by using a multimeter. Disconnect the two-wire connector that plugs into the solenoid valve. When engine is cold and ignition turned on the two wires from the h... Read More »
Source: http://wiki.answers.com/Q/How_to_test_the_EGR_control_solenoid
The EGR system was created to reduce combustion temperatures, which reduces the engine's emissions. This system uses a valve to recirculate exhaust gas from the crankcase back to the intake manifold to be re-burned. Function An EGR solenoid... Read More »
Source: http://www.answerbag.com/q_view/2001721
behind intake manifold Read More »
Source: http://www.fixya.com/support/t4973246-egr_solenoid_located
The 1991 Nissan Sentra exhaust gas recirculation system reduces combustion temperatures in the engine, and that reduces emissions. The EGR is always located on the intake manifold. When the throttle opens, the engine applies vacuum to the E... Read More »
Source: http://www.ehow.com/how_6981112_remove-valve-_91-nissan-sentra.ht...
ok, here is a preliminary test. get an ohm meter aka continuity tester, unplug the solenoid from it's plug style connector. Look inside connector and you will see metal contacts or prongs. Plug your continuity tester leads on the metal pron... Read More »
Source: http://wiki.answers.com/Q/How_do_you_test_a_dodge_egr_solenoid
should be right in front of the battery. The two hard lines on the plenum and one connecting it to the egr valve. Also there should be a black connector coming off your EFI harness attached to it Read More »
Source: http://wiki.answers.com/Q/Where_is_the_egr_solenoid_on_a_nissan_3...
Want A Personal Answer?
735,404 people are answering.
About - Privacy - AskEraser - Advertise - Careers - Ask Blog - iPhone - Android - Help - Feedback ©2012 Ask.com