Topic: Glassblowing
Not finding your answer? Try searching the web for Glassblowing
Answers to Common Questions
What is glassblowing?
the art of blowing glas (with heat) into sculpture Read More »
Source: http://wiki.answers.com/Q/What_is_glassblowing
How to Apply Green in Glassblowing
Pour frit onto the marver. Frit is glass colorant, small pieces of pigment that look like different colored peas. The marver is a steel table you can roll the hot glass on. In times past it was made out of marble and the name has stuck even... Read More »
Source: http://www.ehow.com/how_2295703_apply-green-glass-blowing.html
How to Learn Glassblowing
It takes many years to master the art and science of glassblowing. This page is based on the work of Joseph Wales at East Carolina University Glassblowing Services. Read More »
Source: http://www.ehow.com/how_9761_learn-glassblowing.html
Featured Content:
Glassblowing
More Common Questions
Answers to Other Common Questions
Reheat the glass piece in the furnace to make the glass pliable. First, transfer the glass piece off the tube onto a thinner solid rod called a puntil (pronounced "punty"). Gather a small glob of hot glass called puntee (pronounced the same...
Read More »
Source: http://www.ehow.com/how_2295707_remove-tube-glass-blowing.html
Pour small pieces of blue pigment, called frit, onto the marver. Frit is about the shape and size of colored peas. The marver is a steel work table that you can roll the hot glass on. In times past it was made out of marble and the name has...
Read More »
Source: http://www.ehow.com/how_2295701_apply-blue-glass-blowing.html
With the constant exposure to heat, bright light and glass shards, glassblowing can be hard on your eyes. However, with the right eye protection, your eyes will stay safe and you'll be able to work much more comfortably as you focus on your...
Read More »
Source: http://www.ehow.com/how_2086852_buy-glassblowing-eye-protection.h...
Heat the glass tube so it's nice and pliable to work with. Every process in glassblowing has to be done with precision in order not to ruin the piece. Get it nice and hot so you can do this quickly. Use a tweezers to take off a little bit o...
Read More »
Source: http://www.ehow.com/how_2295708_round-out-tube-glass-blowing.html
Keep the glass piece you are working on attached to the puntil (pronounced "punty"). At this point you should already have any colors you want on the piece and you are going to apply a clear coat of glass over the whole piece just to give i...
Read More »
Source: http://www.ehow.com/how_2295702_apply-clear-coat-glass-blowing.ht...
Reheat the glass piece you are working on. Throughout the glassblowing process, the glass will have to be reheated, as it cools quickly and hardens just enough to be unworkable. You need to keep it soft and workable. Stick the end of the bl...
Read More »
Source: http://www.ehow.com/how_2295706_expand-top-hole-glass-blowing.htm...
