Topic: Hyperterm
Not finding your answer? Try searching the web for Hyperterm
Answers to Common Questions
What is it that the hyperterm actually does to my serial port?
Have you tried using 'FlushFileBuffers()' with your serial port handle? Read More »
Source: http://www.experts-exchange.com/Q_21071228.htm
how can i update the ios using serial 1(Hyperterm)?
Yes, you can but the process is extremely slow. Cisco has detail documentation on their site and you can transmit the IOS image using XMODEM via the console port. I recommend downloading the free TFTP server from Cisco and use a cross over ... Read More »
Source: http://www.experts-exchange.com/Q_11121845.htm
How do I setup Hyperterm to do transfers with my Apple II?
Hyperterm is a good general purpose PC telecom utility for running under Windows on the PC side when transferring files to/from your Apple II. To use Hyperterm, you must first have defined a connection setup and saved it under some name lik... Read More »
Source: http://stason.org/TULARC/pc/apple2/faq/20-020-How-do-I-setup-Hype...
Featured Content:
Hyperterm
More Common Questions
Answers to Other Common Questions
You have it backwards. The RJ45 cable with the converter was the original packaging. The RJ45 with the DB9 attached at the other end has only been out a year or two. Scott "A Sharp" <> wrote in message news:b6ijg.12203$. ..
Read More »
Source: http://www.velocityreviews.com/forums/t299719-rj-45-to-rj-45-cons...
I couldn't find it either but; Start, Run, hypertrm.exe seems to lauch it anyway. All I found was hypertrm.dll.... update.. \Program Files\WindowsNT\hypertrm.exe Looks like they didn't want it in \winnt or \winnt\system32...
Read More »
Source: http://bink.nu/forums/t/3214.aspx
Correct settings in HyperTerminal are: 9600 baud 8 bits no parity 1 stop bit NONE for flow control ( Important
Read More »
Source: http://www.midondesign.com/TEMP08/P07FAQ.html
Correct settings in HyperTerminal are: 9600 baud 8 bits no parity 1 stop bit NONE for flow control ( Important TBD
Read More »
Source: http://www.midondesign.com/LOG08/P07FAQ.html
Correct settings in HyperTerminal are: 9600 baud 8 bits no parity 1 stop bit NONE for flow control ( Important
Read More »
Source: http://www.midondesign.com/Temp05/TEMP05_FAQ.html
check dmesg. also try jsut running the getty command in the foreground and see if there are any verbose flags available for whichever getty comman you use. and like i said, it's tuTTY, not puTTY. serial port access has been on the puTTY wis...
Read More »
Source: http://www.linuxquestions.org/questions/linux-networking-3/window...
