Topic: Natural Gas Heater
Answers to Common Questions
How to Install a Natural Gas Heater
Installing the Natural Gas Line Thoroughly understand the scope of the project before beginning. Check with local building authorities to get information on any building codes that must be met. Purchase all the needed parts before beginning... Read More »
Source: http://www.ehow.com/how_5711599_install-natural-gas-heater.html?r...
How to Buy a Natural Gas Water Heater
When buying a new natural gas water heater many shoppers will only consider the capacity of the tank. Knowing if you need 30, 40 or 50 plus gallons of hot water is a crucial factor, but there are many other considerations to make as well. I... Read More »
Source: http://www.ehow.com/how_6085974_buy-natural-gas-water-heater.html...
How to Convert a Propane Radiant Heater to Natural Gas
Unhook the connections and hoses that feed propane to the heater. Open the access panel on the heater and remove the orifices from the burner unit. These components look like "rings," and they are responsible for feeding gas to the system. ... Read More »
Source: http://www.ehow.com/how_5011506_propane-radiant-heater-natural-ga...
Answers to Other Common Questions
Place the new water heater into position. There should be at least 6 inches of clearance surrounding the water heater for ventilation. Place a level along the side of the water heater to ensure that the water heater is straight. If necessar... Read More »
Source: http://www.ehow.com/how_4811016_install-natural-gas-water-heater....
Switch off the gas valve of your natural gas hot water heater. Allow the heater to sit for at least five minutes before continuing. Move the gas valve to the pilot position, and then hold down the pilot button (it will probably be red) next... Read More »
Source: http://www.ehow.com/how_5011742_light-gas-hot-water-heater.html
Shut off the gas and wait at least 10 minutes for the gas to dissipate, then turn off the water at the shutoff valves. Gas heaters have a gas cut off valve, usually with a handle that is red in color, along the gas line which leads to the w... Read More »
Source: http://www.ehow.com/how_5020416_replace-gas-hot-water-heater.html
Check if the gas is on. Remove the heater's inner and outer access panels and relight the pilot flame by first setting the gas cock on the control box to the "Pilot" setting, then holding a lit match close to the end of the pilot gas tube w... Read More »
Source: http://www.ehow.com/how_5028607_fix-gas-hot-water-heater.html
Out with the Old Choose your size (40-, 50-, 60-gallon, etc.) based on the number of users and appliances that use hot water. A good rule of thumb is that a 40-gallon tank will suffice in a home with four or less people. For every four peop... Read More »
Source: http://www.ehow.com/how_4559115_install-natural-gas-hot-water.htm...
1 Measure the distance from the hot water heater vent outlet to the chimney. Purchase the required amount of 4-inch galvanized sheet metal pipe and elbows. 2 Mark out a spot on the chimney where you want your pipe to vent into. The spot sho... Read More »
Source: http://www.ehow.com/how_6189207_vent-natural-gas-water-heater.htm...
Conventional natural gas heaters were the standard type of home heating available until the mid-1970s. The gas that fueled them could be natural gas drawn from underground fields, liquefied propane or petroleum gas. Most of the heat these o... Read More »
Source: http://www.ehow.com/list_6903863_effects-old-natural-gas-heater_....
Want A Personal Answer?
737,343 people are answering.
About - Privacy - AskEraser - Advertise - Careers - Ask Blog - iPhone - Android - Help - Feedback ©2012 Ask.com