Topic: Skateboard Wheels
Not finding your answer? Try searching the web for Skateboard Wheels
Answers to Common Questions
What are Skateboard Wheels Made of?
Skateboard wheels are made of a rubber-like material called urethane. They come in different sizes from 52mm to 60mm, and have ball bearings built in. Read More »
Source: http://answers.ask.com/Sports/Other/what_are_skateboard_wheels_ma...
How to Select Skateboard Wheels
It may be obvious that you need four wheels to make your skateboard roll properly, but it's not as easy as just grabbing whichever ones you think are pretty. You'll need to select them by size and hardness depending on how or where you will... Read More »
Source: http://www.ehow.com/how_2209120_select-skateboard-wheels.html
How to Clean Skateboard Wheels
Like other areas on your skateboard, the wheels are susceptible to dust, dirt and grime buildup. As you roll over concrete, grass and dirt surfaces debris splashes onto the wheels and collects into the grooves and other areas of the wheels.... Read More »
Source: http://www.ehow.com/how_6113894_clean-skateboard-wheels.html?ref=...
Featured Content:
Skateboard Wheels
More Common Questions
Answers to Other Common Questions
Are you a street skateboarder or are you more of a sidewalk cruiser? If you want to do skatepark riding or you are serious about learning tricks, you'll want hard wheels. Decide or get 2 different boards. For a longboard, you'll combine sof...
Read More »
Source: http://www.ehow.com/how_2132197_choose-skateboard-wheels.html
Skateboard wheel bite is a common issue caused when trucks are too loose, resulting in the wheels coming into too close contact with the board itself. This not only damages the skateboard, but wheel bite can also cause you to lose speed and...
Read More »
Source: http://www.ehow.com/how_2342250_avoid-skateboard-wheel-bite.html
Skateboard wheels are typically mass-produced in an industrial setting. They are made of polyurethane, a versatile and durable synthetic material. According to 1skates.com, Frank Nasworthy invented polyurethane skateboard wheels in 1970. Wi...
Read More »
Source: http://www.ehow.com/how_6376002_make-polyurethane-skateboard-whee...
Skateboard performance can be increased by upgrading the wheel bearings. When they are worn by dust or water, it slows down your board. Test the bearing condition by holding the board off the ground and spinning the wheels. If they spin fre...
Read More »
Source: http://www.ehow.com/how_2296485_install-bearings-skateboard-wheel...
Skateboards rely on one important part--the bearings--to make them roll properly. These bearings need to be cleaned and lubricated regularly to function properly--ideally after every 50 hours of ride time. For faster-turning bearings, thinn...
Read More »
Source: http://www.ehow.com/how_6196735_lubricate-skateboard-wheel-bearin...
Bearings, They are in the metal wheel in the middle of the wheel to make it rotate around the truck axel. the wheels are usually solid if that's what your asking.
Read More »
Source: http://wiki.answers.com/Q/What_is_inside_skateboard_wheels
