Topic:

Udp Port

Not finding your answer? Try searching the web for UDP Port
Answers to Common Questions
To track the different conversations crossing the network at the same time.
http://wiki.answers.com/Q/What_is_the_purpose_of_TCP_o...   See entire page »
You should firstly see if the TCP port works, use a site like this: http://www.amule.org/testport.php Now, scanning a UDP port is more tricky. The only online scanner that I found is this one: http://www.castlecops.com/modules.php?name=UD...
http://www.experts-exchange.com/ITPro/Networking/Syste...   See entire page »
Hi, You'll need the TCP/IP NetBIOS Helper if you want to use File and Printer Sharing on the server. But I'd agree with disabling NetBIOS in the TCP/IP properties, I never liked it. The traffic in question is NetBIOS-NS, NetBIOS Name Servic...
http://www.experts-exchange.com/Networking/Misc/Q_2348...   See entire page »
Answers to Other Common Questions
User Datagram Protocol - A protocol within the TCP/IP protocol suite that is used in place of TCP when a reliable delivery is not required. For example, UDP is used for real-time audio and video traffic where lost packets are simply ignored...
http://www.dslreports.com/faq/2117
well 1st off the server has to be running to have the port open. Secondly, if you have a firewall up that's doing some blocking, you will need what are called iptables rules. For your case 1 rule will do just fine: iptables -A INPUT -p udp ...
https://www.linuxquestions.org/questions/linux-networki...
If a device is there, it responds back on udp port 52354.
http://www.cisco.com/warp/public/117/cdm_cdn/cdm_faq.ht...
You could do it by creating a normal udp socket with socket_create() and using socket_bind() to bind it to a specific port. Then use e.g. socket_sendto for specifying the endpoint and port to send it to. Example code follows. A simple ser...
http://stackoverflow.com/questions/1067579/is-there-a-w...
port number be used? No. You are free to choose whatever port number is most convenient for your application or end-user environment.
http://www.dataexpedition.com/MTP/FAQ.html#2.7
Since both your printer and your desktop are on the LAN side of your router, the hardware firewall isn't really a concern here. I would check the following: -Make sure the printer is actually connected to the network. If you are having wire...
http://www.fixya.com/support/t1935222-figure_out_open_u...
DesktopPerspective has an option to report unknown node names to our server at 161.58.180.113. When a traceroute is run and DesktopPerspective sees a node name for the first time, it is reported back to us. This information is used to updat...
http://www.desktopperspective.com/support/faq.html#udp4...