Dams work by controlling the flow of large bodies of water through a turbine propeller, which turns so that a generator can produce electricity. So, a dam converts the energy of water that is flowing ultimately into electricity.Know More
The operation of a dam requires includes several factors.
Dams are built where there is a large elevation to hold the water behind. There needs to be a lot of water, and the higher the elevation, the more electricity that can be produced.
The flow of water into the dam is controlled through an intake which leads the water into a penstock. The water flows into this area by gravity, so there are no external forces making it move. The volume of water allowed through the intake and the penstock is another determining factor as to how much electricity the dam will produce. More water equals more electricity.
The main purpose of the penstock is to direct the water to the turbine. It has large blades which are pushed by the moving water, causing the turbine to spin.
This mechanical energy is transferred to an electricity generator by a shaft that is connected to both the spinning turbine and the generator. The generator produces the electricity which is carried away from the dam via power lines.
Once the water passes the turbine it goes out of the dam into the river on the other side.
Large bodies of water help to moderate air temperatures of the surrounding regions. They typically cause more precipitation than what usually occurs in the inland regions.Full Answer >
Large bodies of water affect the climate by serving as heat sinks. Oceans and other large bodies of water absorb heat during summer months and radiate it back out during the winter, moderating temperatures for nearby land masses. They also carry heat from tropical regions to other areas via currents.Full Answer >
As the wind hits the surface of the water, the energy transfer of the wind to the water causes the water level to rise and fall, producing waves. To generate wave energy, a technological device that sits in the water is then used to make electricity from the waves, and a cable is used to transfer this electricity to the power grid for use. One of the main benefits of this type of energy is that it is highly renewable.Full Answer >
Wind turbines turn the kinetic energy of the wind into mechanical energy and then electricity through the use of a shaft and a gearbox that power an internal generator. Sensors in the wind turbine allow it to turn and adjust its angle for optimum wind capture. Electricity from the turbine generator goes to a substation, where it is converted to a high voltage capable of transportation through power lines.Full Answer >