Coke and vinegar can't be used together to create a battery. A Coke battery powerful enough to light an LED can be made with the soda, its can, scissors, three strips of copper, three plastic cups, four connectors and sandpaper.Know More
Pour the soda into the cups, and set all three aside. Cut the aluminum can into three strips, each 1 inch wide and as tall as the can itself. If the cups are shorter than this, the strips can also be shorter.
Sand the strips of can until all the paint and plastic are completely removed from the surface on both sides.
Place one strip of sanded aluminum and one strip of copper into each cup, allowing them to protrude over the top. Do not allow the strips of metal to touch each other.
Secure both ends of the first connector to the aluminum strips in two of the cups. Attach the first end of the second connector to the copper strip in one of the cups with its aluminum strips connected. Attach the second end of the connector to the third cup. You should have one free aluminum strip and one free copper strip in a different cup.
Attach one end of your third connector to the unconnected aluminum strip and the other end to one of the LED leads. Attach one end of the final connector to the unconnected copper strip, which should be the only free strip of metal left at this point. Attach the other end of the last connector to the other LED lead. If the LED doesn't light, reverse the direction in which each connector is attached to each lead.
Regular Coke contains a significant amount of sugar, which makes it denser than water, so it sinks. Diet Coke, which is sugarless, is less dense than water, so it floats.Full Answer >
Mentos react with Diet Coke because their rough surfaces provide suitable sites for rapid growth of carbon dioxide bubbles, according to Mental Floss magazine. The bubbles’ buoyancy coupled with their rapid growth, causes them to rise to the surface, resulting in an eruption of foamy diet soda.Full Answer >
Baking soda and vinegar foam, glue and borax putty and red cabbage pH indicator are all excellent reactions to create with household chemicals. They are also safe enough for children to explore.Full Answer >
Embossing is a fun and easy process used to create raised images or 3-D patterns on paper or other materials. You can emboss a variety of items, including store-bought stationery and cards, or make your own using craft paper. With a few supplies and a little time, you can design your own card. You need paper, rubber stamps, an embossing pad, embossing powder and a heat gun.Full Answer >