A pulley works by changing the direction that force must be applied to lift an object against gravity. Other, more complex, systems use multiple pulleys to reduce the amount of force that must be applied.Know More
A simple pulley consists of a single wheel and a rope. Instead of needing to lift an object by picking it up off the ground, a pulley system allows the object to be lifted by merely pulling on the rope. Humans using pulley systems can use their own body weight to counteract the weight of the object, making lifting easier.
A more complex system, such as a block and tackle, makes lifting easier by using multiple pulleys. Usually, these pulleys consist of a rope wound around two axles multiple times. As the rope is pulled, the lower axle and the upper axle are slowly brought together. The number of times the rope is wound around each axle is what determines the rope's tension and, friction notwithstanding, the amount of force required to lift an object. However, energy is always conserved. Someone using a pulley system to use only 100 pounds of force to lift a 400-pound object must pull four times as much rope, expending the same amount of energy as it would take to lift a 100-pound object four times as far.Learn More
Force is any influence to an object which changes its motion, while motion itself is the change in position of an object in relation to is speed, location and acceleration. There cannot be movement without force used against an object to set it in motion.Full Answer >
The force of gravity is an attraction that pulls all matter together. Matter is inherently attracted to other matter, due to the force of gravity. As more matter binds itself together, it exerts more gravity.Full Answer >
Inertia is the tendency for an object to remain in motion or at rest unless it is acted upon by an outside force. In the field of physics, this concept is referred to as Newton's first law of motion.Full Answer >
The parallel axis theorem states that the "moment of inertia of any object about an axis through its center of mass is the minimum moment of inertia for an axis in that direction in space," according to HyperPhysics. It is also know as Steiner's theorem.Full Answer >