Q:

What is SCFM on an air compressor?

A:

Quick Answer

SCFM, which stands for standard cubic feet per minute, is a numerical rating that shows the quantity of air flow a pneumatic tool requires to function at peak performance. The actual value varies based on the pressure exerted by the air in the compressor, which is typically measured in pounds per inch.

  Know More

Full Answer

Air tools often need a vast amount of air volume to operate at a high-performance level. Bigger and more powerful tools require at least 10 SCFM, while smaller devices need around 0 to 5 SCFM. Another performance rating for an air compressor is the HP or horsepower rating, which shows a tool's motive power.

Learn more about Measurements
Sources:

Related Questions

  • Q:

    What is a compressor's function on an air conditioner?

    A:

    The compressor in an air conditioner draws in cool, low-pressure refrigerant gas and squeezes it until the gas turns into a hot, high-pressure gas. The hot gas is pushed into a condenser coil where cool air from the outside is blown over it to make the air warm.

    Full Answer >
    Filed Under:
  • Q:

    How is LB/HR converted to SCFH?

    A:

    Pounds per hour (lb/hr) is a mass flow rate, whereas standard cubic feet per hour (SCFH) is a volumetric flow rate measured at a specific temperature and pressure. Therefore, the density of the fluid being measured as well as the temperature and pressure at which the measurement is taken must be known before the conversion can be performed.

    Full Answer >
    Filed Under:
  • Q:

    How do you convert NM3/h to CFM?

    A:

    To convert from normal cubic meters per hour to cubic feet per minute, it is necessary to convert normal cubic meters per hour to standard cubic feet per minute first. Once the conversion is made, determine the actual pressure and temperature of the flow, and use a conversion equation to find the flow in cubic feet per minute.

    Full Answer >
    Filed Under:
  • Q:

    How do you convert BTU to CFM?

    A:

    To convert Btu per hour to CFM per minute, take the energy transfer rate in Btu and divide it by 100,000. Multiply the result by 96.7. Divide that result by 60 to devise the gas transfer rate in cubic feet per minute.

    Full Answer >
    Filed Under:

Explore