A kayak storage rack is built up for holding two kayaks using different PVC tubes of different dimensions. Tees and 90-degree elbows are also used in assembling and connecting the PVC tubes. Finally, all the assembled components are disintegrated and reassembled rapidly using PVC cement.Know More
Numerous steps are necessary in order to build a kayak storage rack.
Step 1: Cut the two PVC tubes into pieces
Cut two PVC tubes that 10 feet long and 2 inches wide into pieces of varying lengths: two 60-inch pieces, two 30-inch pieces, two 17-inch pieces, four 12-inch pieces, six 6-inch pieces and four 3-inch pieces.
Step 2: Prepare the bottom of the rack with eight PVC tees
Insert 12-inch tubes on each end of a 2-inch PVC tee. Then, insert a 17-inch tube into the central tee. Replicate the same process with another pair of tees. At the end of these two 17-inch tubes, affix another two tees. Finally, place a 60-inch tube between these two tees. At this stage, place the structure in a standing position.
Step 3:Prepare the top of the rack with tees and four elbows
In the four 12-inch tubes, insert the 90-degree elbows, with the ends facing upwards. Insert two 6-inch tubes into the top of the two tees. insert another pair of tees are into the top of 6-inch tubes. Finally, insert a 60-inch tube into the top two tees through the central tee.
Step 4: Finish off the rack with fittings and PVC cement
Disintegrate the rack and rebuild it by placing cement on both the ends of PVC tubes. This process has to be done speedily, since the PVC cement dries up within seconds.Learn more in Water Sports & Activities
To paddle a kayak, coil your body forward, dip the blade of the paddle into the water, push the water past you, and rotate your torso to the other side to start the next stroke. Before even starting, ensure you have the correct body position and paddle grip.Full Answer >
To make a crawfish trap, use hardware cloth to make a cylinder shape with inward-facing funnels on each end. The trap should also have a door to remove the crawfish. The trap can typically be completed in about an hour.Full Answer >
A log rack can be constructed using several steps, starting with building the frame for the rack, and then attaching the legs and fitting the braces to hold the unit together. Before starting a rack-building project, users should make sure that they have the proper tools and equipment on hand to complete the project. Some log racks come as sets and require simple tools, such as screwdrivers and hammers, while others may require power tools, saws and nails.Full Answer >
To make a shoe rack, first cut wood for the sides and toe rest. Measure and drill holes for the dowel rods. Finally, spray paint the shoe rack, if desired.Full Answer >