Q:

How do I calibrate a digital pocket scale?

A:

Digital pocket scales are often calibrated using special weights. However, these weights are expensive. It is possible to use household items with a known mass, such as nickels, to calibrate a scale.

According to Do It Yourself, digital pocket scales can be calibrated using nickels because each nickel has a known mass of 5 grams. Several steps are involved to calibrate the scale. First, clean it with water and then acetone or ethanol. After the scale dries, reset it to zero. Next, find the expected calibration mass of the scale, often found in the user manual. After this gather a certain number of nickels to meet the target mass; as each weighs 5 grams, divide the target mass (in grams) by 5 to determine the number of nickels required. Clean and dry them to avoid alterations in mass. Finally, place the nickels onto the scale, and press the calibration button to let the scale perform the calibration.


Is this answer helpful?

Similar Questions

  • Q:

    How do you calibrate a digital scale?

    A:

    Since different brands and models of digital scales require different calibration methods, the only way to perform a completely accurate calibration is to follow the manufacturer's guidelines. Exact calibration procedures are located in the scale's instruction manual or on the manufacturer's website.

    Full Answer >
    Filed Under:
  • Q:

    How do you calibrate a scale?

    A:

    Some scales, such as bathroom scales, can be calibrated by simply using known weights and adjusting the scale reading to match the amount of the known weight. Digital scales can be calibrated using a weight and the scale's calibration mode.

    Full Answer >
    Filed Under:
  • Q:

    How do you calibrate a digital compass?

    A:

    Calibrating a digital compass is fairly simple process if you know how to force it into its calibration mode. You need an open space to begin the process. Determine whether your compass is a handheld compass or an automatic compass, then set your compass to calibration mode. In an open area, make two full circles within 20 seconds. Turn the calibration mode off. The entire process can take up to 10 minutes based on experience.

    Full Answer >
    Filed Under:
  • Q:

    What is digital information?

    A:

    Digital information is a type of information stored using a series of ones and zeros, according to TechTerms.com. It is the most commonly used method of storing and reading data, as it can be copied, edited and moved without losing any quality.

    Full Answer >
    Filed Under:

Explore