DVD players are connected to Samsung televisions through one of four different types of cable. They are HDMI, AV, S-Video and Component Video. Which one to choose depends on the connections on both the television and the DVD player.
The first step in connecting a DVD player to a flat screen Samsung television is deciding what cables to use. To do that, look at the back of the television and the DVD player. There will be at least one set of connections on both that are the same.
In most cases, there will be more than one choice of connections to use. HDMI offers the best quality video and audio so should be chosen if possible. Almost all modern DVD players and televisions have HDMI connections. If HDMI connections are not available the next best quality connection is Component Video, followed by S-Video, followed by AV.
Switch the television and the DVD player off and use a suitable cable to connect, using the chosen jacks. With cables like HDMI and AV there is only one component on each end. Component Video, on the other hand, has three connectors at each end. Make sure the correct connector goes into the correct jack.
As of 2014, Comcast's customer service telephone number is 1-800-934-6489. This is the initial contact number for all departments, and collections calls are routed to the appropriate department after the call is connected. Comcast does not release a customer-facing direct number for its Collections department.Full Answer >
To remove a tape that is stuck in a VCR, remove the machine's cover and wind the gears to release the videotape and the spool. Sometimes, it is necessary to remove a lodged object that has prevented the tape from moving in the machine, such as a small toy that a child has stuffed through the opening.Full Answer >
To clean a flat-screen television, use a soft cloth to take off any dust, and use a cleaning solution of vinegar and water to remove any hard spots. Wipe gently to avoid damaging the display.Full Answer >
TV picture problems can usually be spotted by checking to see if there are any issues or abnormalities with the TV's On-Screen Display, or OSD, which can be checked by using the TV's remote, not the cable or satellite remote, and clicking on the volume, channel and input buttons to see if the TV's projection lamp is working properly. If it isn't, those patterns that are usually displayed on the screen will look distorted or disappear entirely.Full Answer >