Although both gateways and routers are a part of the process of regulating traffic between two networks, they are different from one another: gateways regulate traffic between two different types of networks, while routers regulate traffic between two similar networks. Even though gateways and routers perform similar functions, this difference means that they are used in different settings and for different reasons.Know More
When a corporation or another group has two different networks that it would like to have interact with one another, it's necessary to regulate and facilitate the traffic between the two. This can be done by taking either a router or a gateway and outfitting it with several network cards. The router or gateway is then placed in between the two networks so that the process of regulation can begin.
However, before determining whether a router or gateway is needed, these groups need to evaluate the networks they are regulating. For example, a computer that is accessing the Internet through the standard Internet Protocol can be used with a router because it uses the same type of networking protocols as the Internet does. But for other combinations of networks, such as a computer with an unusual mainframe environment attempting to join a network of other computers, a gateway is needed.Learn more about Internet & Networking
A default gateway acts as an intermediate device that connects your computer to the Internet. It is located within your Internet Service Provider's premises and is typically a router such as a Cisco brand device. In addition to acting as a gateway to the Internet, it provides security features and other functionality.Full Answer >
A router is a piece of hardware that networks devices such as computers, tablets and gaming consoles together and manages those devices communicating with the Internet. Routers can be wired, wireless or a combination of the two.Full Answer >
To install a router, connect it to your modem and computer using Ethernet cables, follow the steps provided in your router manual to set it up, then connect the rest of your devices to it. The entire process should take no more than an hour.Full Answer >
To reset a router to its original default settings, press the Reset button and hold it for at least 10 seconds, or the amount of time specified in the owner's manual. Power cycle the router if it does not return to full power within a minute of the reset.Full Answer >