The five-digit Comcast remote codes are found in the Comcast's "Universal Remote User Guide." The actual code varies depending on the brand of television set.Know More
The first step in programming the remote is to locate the five-digit code in the User Guide. The consumer should first turn on the TV then press the remote's TV button. Then the "Setup" button should be pressed and held until the TV button flashes two times. The consumer should then enter the five-digit code that was found in the User Guide. The TV button will flash two times if it is the right code. The code should be written down in a safe place for future reference.
If the User Guide is not available, the consumer can use the built-in code search function on the remote. To do this, manually turn on the TV, then press the "TV" button on the remote. Next, the consumer needs to press and hold the "Setup" button until the "TV" button flashes two times. The numbers 911 should then be entered. The "TV" button will flash twice, then the number 1 should be pressed. The "TV" button will flash two times again. The consumer then needs to press the "Power" button and the "Channel Up" button until the TV turns off. Then, press "Setup" to lock the code in.Learn more about Television & Video
Universal remote codes are available on websites such as Eliztech, JumboRemoteControl and CodesForUniversalRemotes. All of these websites offer lists of universal remote controls for a large number of TV models.Full Answer >
Most Toshiba remote codes are found in the user manual for the Toshiba TV in question. To find the code for a particular model, open the user guide for the TV and look for a device code table, then find the device and its manufacturer's name. Press the Mode button, hold down the Recall button and enter the code, then point the remote at the device and press Power.Full Answer >
The remote codes for Dynex television sets are included in the user manual of the device. If the manual is unavailable, the search tool for the remote codes in the Dynex website can also be used. Although some universal remote control units may have the Dynex television remote codes, some brands may not have the codes owing to limitations in the storage capacity of the device.Full Answer >
The codes for Phillips remote controls are available on Philips.com. The user needs to locate the model number of the remote control, which is inside the battery compartment or on the front of the remote, to search for the proper codes.Full Answer >