The data link layer's primary function is to ensure data is received by the correct device in a network using hardware addresses, called MAC address, and then convert that data into bits for the physical layer to transmit. It also manages error notification, flow control and network topology.Know More
This OSI reference model layer also provides physical transmission of data by formatting messages into small pieces, called data frames, and encapsulates the frames with additional data containing the hardware address of the destination device along with the information of the source device. Every time a data packet is sent between devices, the data link layer frames it with control information, so devices such as routers and gateways can properly forward the data to the correct device.
Routers and switches also work at the data link layer to communicate and uniquely identify devices that are connected to a local network. A typical Ethernet network uses MAC addressing to communicate with devices. Without the data link layer to frame data packets, data broadcasts within a domain are prone to collision that could lead to network traffic congestion and lost data transmissions.
The data link layer resides under layer two on the OSI reference scale and is among the top three layers that define how devices and applications within a network communicate with each other and users.Learn more about Internet & Networking
Calculating the bit error rate involves dividing the number of bit errors by the total number of transferred bits during a fixed time interval. Bit error rate, or bit error ratio, is a unitless measure expressed as a percentage.Full Answer >
Data transmission speed is usually measured in bits per second and its derived units -- kilobits, megabits and gigabits per second. Sometimes it is expressed in bytes; a byte equals eight bits.Full Answer >
The ozone layer, also called the stratosphere, has a primary function of absorbing ultraviolet sunlight. The absorption of ultraviolet rays has many effects, such as atmospheric temperature regulation and protection of biological entities.Full Answer >
The primary function of a stirring rod is to stir solutions by hand. Stirring rods have other uses in the laboratory, however, including helping to decant liquid from containers, breaking up emulsions and inducing crystallization.Full Answer >