The most common universal remote codes for JVC televisions are 1011, 1012, 1026, 1049, 1052, 1054, 1055, 1080, 1092, 1117, 1131, 1235, 1288 and 1299. The common codes for HD televisions are 1130, 1131 and 1227.Know More
If the universal remote has a Code Search or Program Search button, the remote can be programmed without a code. To use the Code Search feature to program the TV set, first switch the TV on. Press the TV button on the remote, then press and hold the Code Search or Program Search button until the LED on the remote starts to flash. Press the Power button repeatedly, leaving 1 or 2 seconds between presses, until the TV turns off. Now press the Enter or Program button. Press the Power button again to switch the TV on, then check that the other buttons, such as Vol+ and Vol-, operate correctly.
If the remote has no Code Search or Program Search button, it may still have the feature installed. Switch the TV on, and press the TV button on the remote. Now press the Power button or the TV button repeatedly until the TV switches off. Immediately after the TV switches off, press the Enter or Program button. Switch the TV on with the remote, and check that all of the applicable buttons work.Learn more about Television & Video
As of 2015, Walmart sells universal remotes within a price range of $4.99 to $100 and up. The price of a universal remote control depends on levels of functionality and hardware.Full Answer >
The Sharp television codes for programming an RCA universal remote are 011, 020, 025, 027 and 037, as well as 052, 053 and 060, as of 2015. Remote control programming codes rarely change; however, new televisions sometimes come with a new code, which can leave older remotes incompatible.Full Answer >
To troubleshoot a JVC TV, reset the television, adjust the brightness and contrast, and replace the audio cables. The specific steps for troubleshooting a JVC TV depend on the particular problem.Full Answer >
For a JVC television, the universal control remote codes are 0060, 0026, 0197, 0069, 0242, 0923, 0012, 0065, 0067 and 0141. These are the universal codes that have been published for all JVC remote controls.Full Answer >