To measure television screen size, place the hook of a retractable tape measure at one corner of the screen and pull the measure diagonally across the screen. Measure the corners of the screen rather than the bezel of the television.Know More
Hold the hook of the tape measure on the upper left hand corner of the television screen, just inside the bezel of the TV.
While holding the hook at the upper left hand corner, pull the tape measure diagonally across the screen. Stop at the edge of the screen, just inside the bezel of the television.
The tape measure component marks the length of the television screen. Record the number that the tape measure is showing.
To hook up a surround sound system to a television, run an audio cable from the output connection on the television to an input connection on the sound system amplifier. Many televisions have RCA audio output connections, but some may have headphone output connections.Full Answer >
To get cable channels without a cable connection, install an indoor antenna, use a streaming video service, buy desired cable shows one at a time through iTunes or Amazon or install a video streaming box or over-the-air DVR. Cable television options are available with minimal amount of additional equipment without a cable connection.Full Answer >
A lot of consumers think that a television's screen size is the width of the screen from left to right. But in reality, it is a diagonal measurement.Full Answer >
Mounting a flat screen television on a wall is a simple process that requires some caution. The process takes about an hour, and you need a screwdriver, lever, stud finder, drywall saw and a pencil. It is also helpful to have an assistant. If the mount on the set does not allow a swivel, you will have to set the television at eye level. If the mount swivels up and down and to each side, you have more options.Full Answer >