To program your Comcast remote, acquire the manufacturer’s programming code that corresponds to your cable box or television set. Programming codes are located in the Comcast Universal Remote Control user guide.Know More
Visit the section of the Comcast Universal Remote Control user guide that corresponds to the specific make of your television. Highlight or record the codes on a separate piece of paper in the order they appear. After acquiring the codes, turn on your television, and visit a working channel with both picture and sound.
On your Comcast remote, press the TV key once. Then, press and hold the Setup key until the TV key blinks twice. Following the blinks, release the Setup key, and enter the first five-digit code from the guide. If the code is valid, the TV key blinks twice. If the code is invalid, the TV key blinks once. Continue entering the codes until the device registers a valid entry.
If your television is not listed in the guide or you are not successful in entering a code, press TV once. Then, press and hold the Setup key until the TV key blinks twice. Release the setup key before entering 9-9-1. Press and release the 1 key, and then press Power and CH+ until your TV turns off. Once off, press Setup once to submit an IR code from the database to your device. Press power to turn your TV back on to ensure that your device is controlled by your remote.
To program a RadioShack universal remote, first choose the device type to be programmed. To program TVs, choose the TV device key. For cable converters, choose CBL.Full Answer >
A special code that is exclusive to Panasonic and the particular model is required to program a Panasonic universal remote. This code is mentioned in the user manual, which comes along with the new Panasonic television.Full Answer >
To set up a universal remote control, determine the programming codes for each device you wish to program, and input each code with the remote. You need the manual for your remote.Full Answer >
To program a LiftMaster remote control, first locate the "Learn" button — it comes in a variety of colors. Press and release the Learn button; the user then has approximately 30 seconds to press and hold the button on the remote control.Full Answer >