Use an inkjet resetter to reset the Kodak 10 Series ink cartridge chip. A resetter helps the printer detect refilled ink levels and prevent triggering of low ink warnings. You need a color inkjet printer using Kodak 10 Series cartridges and a chip resetter to get started.Know More
Locate the ink cartridge door on the printer. Open the door, and push on the green lever to loosen the cartridge from its slot. Next, grab the cartridge, and carefully slide it out from the slot. Place the cartridge on a covered surface next to the printer.
Pick up the cartridge, and turn it over. Locate the chip on the bottom of the cartridge.
Pick up the chip resetter, and press it against the cartridge chip. Hold the small button on the chip resetter for at least three seconds to reset the cartridge.
Open the printer cartridge door, and place the cartridge back in its slot. Make sure the green lever snaps in place and holds the cartridge tightly. Close the printer cartridge door.
Turn on the printer, and check for any warnings. Print a document to make sure the printer works normally.
Use the Reset option within the Troubleshooting section to reset Firefox to factory defaults. You need Firefox installed on your computer to begin.Full Answer >
Use the installation disc or the recovery partition to perform a factory reset in Windows 7. You need a Windows 7 computer with an installation CD or a built-in recovery partition to begin.Full Answer >
The oil service light on a BMW 5 series can be reset by using a special tool that plugs into the interior harness of the car. The switch acts as a diagnostics machine and allows the user to clear any codes the computer has created.Full Answer >
Hydrographic equipment includes sand-blasting cabinets, paint-stripping machines, tanks, spray guns, infrared heat lamps, paint-spray booths, wash-rinse stations and static-printing machines. Hydrographics is used by a variety of organizations, from large-vehicle manufacturers like Mercedes and BMW to smaller specialty shops.Full Answer >