Depending on the model, a Clarion car stereo clock can be set by using the band and display buttons, the adjust button, the band and function buttons or the clock knob. Users may need to try different methods to determine what works for their model stereo.Know More
The first method of setting the clock is to press the band and display buttons once to display the clock and again to display the flashing time, and then using the left and right search buttons to set hours and minutes before storing the time by hitting the band button. Some models require hitting the display button instead of the band.
A second method involves using the band and function buttons together, instead of the band and display. The user finishes by hitting the band button to store the time.
Another method requires pushing the adjust button once to select the clock, pushing it again to select the hour and minute and using the rotary knob to set the time. Pressing the enter button stores the correct time.
The final method is to press the clock button until the minutes flash, then press the clock knob to adjust the minutes. Five seconds after being released, the user can use the clock knob to set the hour. The hour finalizes five seconds after being released.Learn more about Technology
To remove a Kenwood car stereo, unplug the stereo and pop the plastic casing away from the control panel, then use stereo removal tools and a screwdriver to unclasp the stereo from the vehicle's dashboard before disconnecting the speaker cables. The entire process should not take longer than a half-hour.Full Answer >
Hooking up an equalizer in a car stereo involves hooking up an RCA patch, connecting the equalizer’s output to the amplifiers’ RCA inputs and connecting the equalizers to the receivers. Hooking up an equalizer requires its output be sent to an outboard amplifier. A good equalizer allows users to adjust the specific frequency bands to the desired setting.Full Answer >
A car stereo code is an anti-theft feature implemented by many of the major automobile manufacturers. When a car stereo is disconnected, it is rendered unusable until the user enters the proper security code. Some cars also require the code if the battery runs out of power.Full Answer >
A JVC car stereo can be wired into an automobile's existing electrical system via a suitable wiring harness or by connecting specific color-coded cables to the appropriate electrical points in the vehicle. The exact steps to wire a car stereo vary depending upon the model and also upon the additional components in the vehicle's audio system.Full Answer >