Many problems associated with Mitsubishi televisions can be fixed by resetting the unit to default. To restore the factory settings, press Enter and then reset. The most common problems are associated with television controls, cooling-fan failure or projection lamp failure. Mitsubishi televisions have diagnostic features that show the cause of the last shutdown as long as it has not been turned on again after the shutdown.Know More
Color inaccuracies can be fixed by pressing the Menu button and selecting the key to highlight "perfect color." If the television has problems with video or audio, press the Menu button, and reset all inputs to the original factory settings. You can also reset the television controls by pressing the Menu button and typing "123" to reset.
If you notice the Power button blinking five times after using the remote, change the batteries in the remote because this is an alert for low batteries. If the projection lamp fails to work, remove the lamp compartment using a Philips-head screwdriver. Ensure the bulb is cool and the television is unplugged before replacing the lamp. Remove the old cartridge and insert a new one, secure the lamp and replace the cover. Button names may differ depending on the Mitsubishi television model.Learn more about Television & Video
The digital and analogue channels of a Samsung TV can be tuned by using the auto store function. The tuning can be performed by simply using a remote control.Full Answer >
Logik is produced by the European electronics company Currys. Currys distributes electronics to a global market and produces Logik electronics as a budget friendly option for its consumers.Full Answer >
To connect your AppleTV to your television, connect the HDMI cable from the AppleTV to your television. Next, you can optionally connect an Ethernet cable to your modem and an optical audio cable to your stereo receiver.Full Answer >
Television screens are measured diagonally because this is the way screens were originally measured. Early TVs had circular picture tubes that projected images onto the screen. The surface area of the screen could not be larger than the surface area of the tube, so measuring the tube gave the best measurement of the screen.Full Answer >