For a JVC television, the universal control remote codes are 0060, 0026, 0197, 0069, 0242, 0923, 0012, 0065, 0067 and 0141. These are the universal codes that have been published for all JVC remote controls.Know More
JVC universal codes can also be found on the instruction sheet or manual guide that comes with the remote control or television set. If these universal codes do not work, then one can call or email JVC directly to determine the correct code.
To set the programming on a JVC remote control, it is first necessary to press the "SETUP" button. Users can look for the red indicator light to turn on and stay on. Once it is on, then the button can be released. From here, it is time to press the button (TV, DVD) that is connected to the device that one wants to control quickly. The indicator light should blink once and then stay on. The next step is to choose one of the JVC universal codes to put into the device. If it is valid, then the light will turn off and, if it is not valid, then the light will begin to flash. Finally, the device can be turned off manually and reset. The remote should now work completely. If it does not, then it will be necessary to try the other JVC universal codes.Learn more about Television & Video
The General Electric universal remote control codes are the codes used in tandem with the GE universal remote to operate various consumer electronics devices. The Jasco-owned GE universal remote control offers two distinct methods of programming it for use with consumer electronics devices.Full Answer >
The Eliztech website has universal remote control codes for Apex TVs. The codes are 1236, 1241, 1287 and 1376. In order for a universal remote to communicate with an Apex TV, one of these codes must be entered into the remote.Full Answer >
The code for Sanyo TV's remote control One-for-All URC 3220 is either 0032 or 1232 for the Sony VHS/VCR combination of the unit. The remote control does not work for the Sony LDP, the Sony Beta VCR or the Sony 8mm VCR.Full Answer >
An RCA universal remote control can be synced using its automatic code search feature. This process may require a bit of trial and error before the remote gets synced properly with the target component.Full Answer >