To program a Magnavox universal remote control, find and enter the four-digit code that connects your remote to your television. If you don't have access to four-digit codes, you can perform a code search to program the remote.Know More
In your Magnavox universal remote control manual, look up the code for the television you wish to control by brand name. Write down or memorize the code. If you do not have access to the four-digit codes, skip to step 3 to search for the code manually.
Turn on your television, and hold down the Set button for about two seconds. Then, press the TV button. Using the numeral pad, enter the four-digit code. Press the Set button again. Your Magnavox universal remote is programmed to control your television. Test the remote to make sure that it turns your television on and off properly.
If you cannot find your four-digit code or if the code you entered did not work, perform a manual code search. Turn on your television, and hold down the Set button for about two seconds. Press the TV button. Press the Vol+ button repeatedly until your television turns itself off. Press the Set button.
For a JVC television, the universal control remote codes are 0060, 0026, 0197, 0069, 0242, 0923, 0012, 0065, 0067 and 0141. These are the universal codes that have been published for all JVC remote controls.Full Answer >
To code a Phillips remote control for a DVD player, first turn on the DVD player and make sure it is in "code search" mode, then use the remote to press DVD and enter the three- or four-digit code that corresponds with the specific model and make of the DVD player. A list of codes should have come with the remote control when it was purchased.Full Answer >
The Eliztech website has universal remote control codes for Apex TVs. The codes are 1236, 1241, 1287 and 1376. In order for a universal remote to communicate with an Apex TV, one of these codes must be entered into the remote.Full Answer >
To program a RadioShack universal remote, first choose the device type to be programmed. To program TVs, choose the TV device key. For cable converters, choose CBL.Full Answer >