Q:

How does an automatic gearbox work?

A:

An automatic gearbox uses a system that includes fluid coupling to transfer the engine's power to the transmission and a set of planetary gears that are locked or unlocked in different combinations to engage different gears. One of the most complicated components in modern vehicles, an automatic gearbox includes mechanical, hydraulic, electrical and computer systems.

Know More

Full Answer

The mechanical system
The mechanical system of an automatic gearbox contains a set of planetary gears controlled by a number of clutches and bands. A hydraulic system controls the clutches and bands themselves.

The gears in an automatic transmission are always engaged to the same gears. For example, in a simple planetary gear system with an outer ring gear, a central sun gear and two or more planet gears, the gears are always in contact with each other. If the sun gear is locked, rotating the ring gear would cause the planet gears to revolve in the same direction at a slower speed. However, by locking the planet gears, the ring gear's rotation would turn the sun gear in the opposite direction, providing a reverse gear.

Most gearboxes use two or more planetary sets, resulting in a larger number of possible gear combinations.

Controlling shift points
In newer cars, computers precisely control shift points using input from sensors in the engine and transmission to decide when to shift gears and how fast to engage them.

Non-computerized automatic systems use a governor, vacuum modulator and throttle cable to correctly detect when a shift is needed and change gears.

Learn more in Transmission

Related Questions

  • Q:

    How long should an automatic transmission last?

    A:

    After the engine, the most expensive repair for a vehicle is the transmission. With absolutely no care or maintenance, an automatic transmission can last as little as 30,000 miles. With very slight maintenance, the transmission should last well over 100,000 miles.

    Full Answer >
    Filed Under:
  • Q:

    What is a four-speed automatic transmission?

    A:

    A four-speed automatic transmission is a vehicle transmission system with four gears and an automatic shifter that does not require the driver to work the gearshift manually. Four-speed transmissions were common in vehicles from the 1960s through the 1980s, but have largely been replaced by five-speed transmissions in newer vehicles.

    Full Answer >
    Filed Under:
  • Q:

    What is an automatic transmission valve body?

    A:

    An automatic transmission valve body is a major component of a vehicle's automatic transmission system and directs pressurized transmission fluid to a network of valves that engage appropriate clutch packs for smooth gear shifting. These valves use pressure as hydraulic signals to determine which gear set, also called band servo, to select when the vehicle changes speed.

    Full Answer >
    Filed Under:
  • Q:

    How do I tell if my automatic transmission linkage is faulty?

    A:

    The most common indicators that an automatic transmission linkage is faulty are frequent overheating of the engine and significantly reduced transmission fluid. It is also likely to hear clanging and banging noise during operation. Faulty automatic transmission linkages occur from regular wear and tear or due to lack of regular maintenance.

    Full Answer >
    Filed Under:

Explore