While there are several problems that lead to windshield wiper chatter, Popular Science reports one of the most common is a bent wiper blade causing the blades to strike the windshield at something other than a 90 degree angle. It suggests using a couple of adjustable wrenches to bend the arm back to the correct angle.Know More
Dirt, oil and wax on the glass or wiper blade also cause chatter. A good glass cleaner and a good scrub help to remove the buildup to eliminate the problem. Cleaning the glass in this way also gives the vehicle a great shine. Cleaning the wiper blades also helps to ensure they work correctly.
Operating the wipers in below freezing temperatures also causes chattering. The problem is often that there is still a layer of ice on the glass. Drivers overcome this issue by allowing the defroster to heat the glass and melt the ice. A deicing spray helps to speed the process.
While the noise of wiper chatter is annoying, their effects can make driving dangerous. They leave streaks on the windshield, impairing the driver's vision. While cleaning the glass at the service station with a squeegee provides temporary relief, fixing the problem correctly helps to ensure safer travel.Learn more about Car Parts & Maintenance
There are several problems that can indicate that a car's starter should be replaced including a clicking sound when trying to start the car, a slow starter speed and a grinding noise while the engine is running. A starter is a part of the engine within the car so it is important that the starter is in working condition in order for the car to run properly.Full Answer >
To install wiper blades, remove the old blades, line up one of the new blades with the first arm, and hook the new blade into the clip. Repeat this process on the other side.Full Answer >
Replace wiper blades by selecting the appropriate refills, removing the old blades and installing the new ones. The process takes just minutes and improves your vision and safety when operating your vehicle.Full Answer >
To replace wiper linkage, remove the wiper arms, open the vehicle hood, expose the wiper linkage, remove the wiring harness, unbolt the old wiper linkage, attach the new linkage, replace the wiring harness, plastic trim and rubber moulding, close the hood and reattach the wiper arms. This 45-minute procedure requires safety gloves, a wrench, a screwdriver and new wiper linkage.Full Answer >