The best way to clean corroded battery terminals is with a solution of water and baking soda. To make the solution, pour 1 teaspoon of baking soda into 1 cup of water. For safety reasons, use gloves and safety glasses when cleaning the terminals.Know More
Before attempting to clean the terminals, remove them from the battery posts with a wrench. Take the terminal off the negative post first. Disconnecting the terminal from the positive post before removing the negative post carries the risk of electric shock.
Once the owner removes both terminals, she should pour some of the cleaning solution over them. Then she takes a wire brush and rubs it on the terminals. The owner continues with this process until the corrosion is gone. When the terminals are clean, she wipes them off with a rag or paper towel to remove any of the excess solution. Individuals need to make sure that the battery posts are free of corrosion before reattaching the terminals.
Cleaning a car battery terminal on regular basis is a key automotive maintenance task. If an owner allows the corrosion to build up to significant levels, the car could refuse to start. To prevent battery corrosion, owners can purchase coated pads that inhibit the formation of corrosion on the battery at any local auto parts store.Learn More
The purpose of the Fleetguard filter cross reference is to be able to take a filter's Fleetguard number and interchange it. To get to the interchange guide, there are specific instructions users must follow exactly.Full Answer >
There are many symptoms of drive shaft problems, including car noises, difficulty turning the car and shaking of the car. It is important to diagnose and fix drive shaft problems early because no car can shift from idle to drive without a functioning drive shaft.Full Answer >
The most common problem with the 2003 Oldsmobile Alero is the failure of the passlock sensor in the ignition lock cylinder. This causes the security system to prevent the car from starting. Replacement of the lock cylinder corrects the problem.Full Answer >
There are hundreds of Ford engine codes, or on-board diagnostics, but some of the more common ones encountered are P0455, P1000, P1131, P0171 and P0102. A vehicle's on-board diagnostics is its way of communicating any issues found during self-diagnosis. Under the on-board diagnostics system, all light duty card and trucks must monitor specific systems and use generic codes to indicate any problems that are found.Full Answer >