A horn on a car will fail when there is a problem with its wiring or speaker unit. Generally there are two speakers used on a car and both can be found in the front of the vehicle, behind the bumper.Know More
If there is an issue with the horn itself, the speakers will still create a faint or weak sound. If this occurs, follow these instructions to troubleshoot the horn:
Open the engine compartment and locate the horn assembly.
The speakers are mounted behind the front bumper.
Inspect the wire terminals and clean off any corrosion. Reconnect them and try the horn again. If it still does not work proceed to step 4.
Inspect the ground and clean off any corrosion, then reconnect it. Check the horn again. If the unit still does not work, replace the assembly.
If the voltage on the assembly is good, check the connection between it and the button. Modern vehicles will have the horn button on the inside of the steering wheel next to the air bag. If the button turns out to be the root of the issue the vehicle should be inspected by a certified technician, as accidental deployment of the airbag can result in lethal harm.Learn more about Car Parts & Maintenance
A car can hesitate or stall while going uphill for a number of reasons, but typically the problem occurs when the engine's valves and rings are worn. Because driving uphill puts the engine under additional stress, less compression is dispensed, which weakens the engine over time. Stalling can also occur when the engine's sensor no longer works.Full Answer >
Diagnosing what is wrong with a car involves troubleshooting based on what the problem looks like, feels like, sounds like or smells like. Most DIY diagnostics on the web such as Auto MD or Auto Zone start with these symptom checkers.Full Answer >
When the explosive noise of a car backfire occurs, it usually indicates that the air-to-fuel mixture is unbalanced or that a problem exists with the vehicle's timing. A backfire is the result of fuel burning outside to the engine's combustion chamber. Backfires can occur in either the intake system or the exhaust system, depending on the cause.Full Answer >
If a car turns over but does not start, it has a problem with compression, ignition or the fuel to air ratio. Determining which of these three areas is responsible for the problem is the first step in troubleshooting, according to the Linn-Benton Community College.Full Answer >