When a car's distributor cap becomes faulty, the sequence of the functions of the engine will become out of order and will begin to fail. This can cause the car to have higher revolutions per minute, shake while idling, produce a high-pitched squealing noise and even begin to stall or backfire. The distributor cap must be replaced to address these issues.Know More
Cars that are started in the cold and driven immediately or cars that are kept in extremely cold temperatures are more likely to have a distributor cap become faulty. Distributor caps are made out of a plastic material, and plastic that is heated and cooled too quickly can sustain damage. The cap can crack and burst if it is started in the cold weather on a regular basis. If the distributor cap is cracked, it should be replaced before it begins to cause other engine problems.
One of the most obvious symptoms of a bad distributor cap is a shaking car. If the car is at a stop sign or a red light and is idling and it begins to shake, the distributor cap may not be causing the proper rotations within the engine.Learn more about Car Parts & Maintenance
Small amounts of water will likely burn off as the engine heats, but larger amounts of water will change the car engine oil's consistency, potentially causing serious operational problems with the car. Water should never be added to automotive engine oil deliberately, and typically the two substances only mix through condensation, which is normal and unlikely to cause problems. However, water can also enter a car's engine oil through broken gaskets within the car's cooling system, which would need to be evaluated by a qualified mechanic for repairs.Full Answer >
When an engine knocks, one of the likely causes is low-quality fuel. Fuel of low quality or a low octane rating results in many different problems in the engine. This fuel rating informs the consumer of the amount of compression gasoline is able to tolerate. According to HowStuffWorks, these problems are why high-performance engines require higher-octane fuel to prevent knocks.Full Answer >
Straight water should not go into an engine at all, but people can use a mixture of automotive engine coolant and water which can be poured into the car's radiator using the radiator fill cap.Full Answer >
To steam clean an automotive engine, first prepare the engine by allowing it to reach a proper temperature, then cover all sensitive components. Next, clean the engine using a degreaser and steam-cleaning equipment. Dry off the engine to finish the job.Full Answer >