If too much coolant is put into the cooling system of a car, the extra fluid flows out of the overflow pipe. Coolant and antifreeze, as well as many other car fluids, are highly toxic and can be harmful to children and pets.Know More
If there is too much liquid, it is flushed through the overflow pipe. If it is low, additional coolant should be added.
Due to the heat and pressure of the radiator, it is best to work on the system when the car is cool or use a cloth to protect skin from contacting the cap. Add equal amounts of coolant and water until the level is near the "MAX" line on the reservoir.Learn more about Car Parts & Maintenance
Different manufacturers recommend different intervals for flushing the coolant from a car's cooling system, but the most common time frames range between two to three years. This time frame varies with the particular vehicle and the type of coolant that the car needs.Full Answer >
To add coolant to a car, open the hood, and remove the cap on the white plastic tank that is next to the radiator. Add a 1:1 mixture of coolant and water up to the full mark, and replace the cap.Full Answer >
The effects of putting syrup in the gas tank of a car depend on how far the syrup gets into the fuel system. If the car is started and run for any length of time, the syrup can end up clogging the fuel filter, which can cause the flow of fuel to be restricted, and in turn can cause the engine to stop running. If the syrup gets to the filter, the gas tank may need to be replaced.Full Answer >
According to HowStuffWorks, pouring sand into a gas tank has the potential to clog up the fuel filter in a car, which causes the car to become disabled. However, the amount of sand that needs to be put into the gas tank to achieve this is great, and it is not guaranteed to work.Full Answer >