Saginaw transmissions can be identified by the material of the case, the position of the shifter arms and transmission codes. Produced in three- or four-speed models, these manual transmissions were installed in a number of GM cars, including the 1967 Chevrolet Camaro and 1969 Chevrolet Impala.Know More
Unlike Muncie transmissions, another staple of GM cars during the era, Saginaw models feature a cast iron case instead of an aluminum one. Saginaws also had shifter arms fitted on the side cover of the case, not on the tailshaft.
Transmission identification codes can provide positive identification of a transmission. Saginaw models should have the code stamped on the plate located next to the rear cover, on the lower right side of the case. For example, the codes used for Chevrolet cars began with "R" for Saginaw four-speed types and "S" for three-speed models. A series of numbers and characters follow the code letter, indicating date and time of assembly.Learn more about Transmission
Adding transmission fluid to an Isuzu Rodeo involves removing the bolt to the transmission case and pumping the fluid in by hand using a pump. This is the only way to add fluid, since there is no valve under the hood to facilitate the process. Transmission fluid, a ratchet and a small hand-pump are the only materials necessary to complete this task.Full Answer >
Manual transmission systems have the potential to improve fuel efficiency, enhance performance, and may reduce the average price of a vehicle Manual transmissions can tremendously improve the performance of cars, particularly those with smaller engines. They are considered by many drivers to be more fun to use, and may reduce gas consumption.Full Answer >
Pontiac Montana transmissions tend to develop slippage over 54,000 miles. The 2007 model year showed slippage after 59,900 miles, while the 2004 tended to slip after 55,000 miles.Full Answer >
With few exceptions, cars with automatic transmissions should always be shifted into overdrive, as it allows the vehicle to shift into the highest gear available. While in a lower gear, the engine may work harder to maintain speed and use more fuel.Full Answer >