Q:

How do you remove a mobile home bathtub?

A:

Remove a mobile home bathtub by turning off the water, disconnecting the drain and water pipes, removing the tub surround rivets, and pulling out the tub surround. Then, unscrew and remove the tub.

  1. Turn off the water

    Find the water shut-off valve leading to the tub, and turn off the water. Turn off both the cold water valve and the hot water valve.

  2. Remove pipes from the drain

    Take apart the p-trap, and unscrew the pipe from the tub drain.

  3. Remove the faucet from the waterlines

    Using a wrench, unscrew the faucet from the back of the tub. Remove the faucet and handles.

  4. Remove the surround

    Cut off the head of the rivets on the surround with a knife. Then, use a utility knife to loosen the caulk around the perimeter of the surround. Once the surround is loose, pull it off with your hands. Do this carefully to prevent damage to the wall.

  5. Remove the screws from the tub's lip

    Using a drill or battery-operated screwdriver, remove the screws from the lip of the tub.

  6. Lift the tub out of the space

    Once you remove all the screws from the lip of the tub, ask a friend to help you lift the tub out of the space.


Is this answer helpful?

Similar Questions

  • Q:

    How do you clean outside a mobile home?

    A:

    Cleaning the outside of a mobile home is a process that takes a variable amount of time depending on the severity of the dirt and the size of the home. In order to clean the outside a mobile home, you need a pressure wand, water, liquid soap, rags and vinegar.

    Full Answer >
    Filed Under:
  • Q:

    How do you remove air from your water pipes?

    A:

    Remove air bubbles from water pipes by turning off the water supply, locating all of the faucets and turning them on, and then flushing the remaining water out of the system. Finally, close the faucets, turn the water back on and wait for the pressure to run smoothly from all of the faucets.

    Full Answer >
    Filed Under:
  • Q:

    How do I remove a tragus piercing?

    A:

    Remove a tragus piercing at home by unscrewing the ball of the captive bead ring jewelry with a pair of pliers. It is advisable to have your professional piercer remove the tragus piercing if possible.

    Full Answer >
    Filed Under:
  • Q:

    How do you unclog a bathtub?

    A:

    To unclog a bathtub drain, remove the stopper, cover the overflow drain, and plunge the drain. The only tools required are a plunger and a wire coat hanger.

    Full Answer >
    Filed Under:

Explore