Repair scratches in alloy wheels by cleaning the surface, applying filler and sanding until smooth. Apply a new coat of silver wheel lacquer and clear coat. Polish with wet-dry sandpaper to feather the finish. The process requires several days.Know More
Use paint thinner to clean the scratched wheel. Removal of all wax, dirt and grease is required for the paint to adhere properly. Sand the area immediately surrounding the damage and wipe clean.
Use masking tape to protect the tire. Mix the spot filler according to label directions and apply to the damaged area. Sand until smooth, apply more filler and sand with a finer grit sandpaper. Repeat this process until the damage is filled and smooth.
Mask any area where you do not want paint. Spray sandable primer over the spot filler. Remove any over-spray immediately from the other spokes of the wheel. Sand the primer until smooth once it dries. Clean the area to remove any dust
Apply the silver lacquer to the damaged area. Spray a thin layer. Allow to dry overnight.
Apply two coats of clear coat to give the repaired area the desired gloss. Apply the second coat after 20 minutes waiting time. Allow 24 hours to dry.
Use 2000-grit wet-dry sandpaper to buff the repair work to a shine.
To clean alloy wheels, rinse them, apply alloy wheel cleaner, scrub the wheels, clean the lug nuts and wheel wells, and dry them. The supplies you need are a hose with a pressure nozzle, alloy wheel cleaner, scrub brushes, a lug nut brush, all-purpose automotive cleaner and a black towel.Full Answer >
Remove scratches from plastic by cleaning the surface and buffing out the scratch with brass cleaner on a microfiber cloth and then cleaning the surrounding area with a vinegar-and-water mixture. Additional applications may be necessary depending on how deep the scratch is.Full Answer >
In order to remove scratches from a CD, wash the CD well, and then use baking soda toothpaste to gently buff scratches off the surface of the CD. Use a paste toothpaste rather than a gel to ensure that the paste removes as much of the scratch as possible.Full Answer >
You can remove scratches on the surface of a disc using toothpaste or peanut butter. Applying a dash of toothpaste with a clean cloth on the scratched areas and rubbing gently outwards is an effective way to remove light scratches on the disc.Full Answer >