To repair a car ceiling, apply adhesive spray to the damaged areas and press the ceiling against the roof to ensure it sticks. All you need is a suitable adhesive spray and another person to assist if necessary. The repair of a car ceiling takes a minimum of 10 minutes depending on the size of the roof.Know More
Analyze the ceiling carefully and identify the damaged areas. Mark the areas that are falling apart and those that are about to fall off.
Remove any devices mounted on the ceiling such as the dome-light and hooks for clothing sun visors. Scrap off the old adhesive, and ensure that the surface is clean. Use a piece of cloth and foamy water to clean the surfaces of the roof where the ceiling is damaged. Dry the areas thoroughly with a cloth, or leave the areas to dry naturally before applying the adhesive.
Spray the adhesive spray on the inner surface of the damaged ceiling parts. Rub the ceiling onto the roof, and make sure that the adhesive spray sticks. Wipe away any amount of spray that overflows to the outer side of the ceiling.
In order to repair a car that has been keyed, sand down the area around the scratch, apply a rubbing compound and polish. Minor scratches can be repaired using a paint pen instead.Full Answer >
Repair a leather car seat by applying a leather filler to the seat's backing with a thin implement, such as a palette knife. For deeper cracks or scars, administer multiple layers of filler. Use a grain pad to match the texture of the filler with the rest of the car seat. Finish by rubbing on a leather dye that matches the color with the surrounding leather.Full Answer >
To repair a car dent, strip the paint from the affected area, mix and apply filler, sand the area, and finish by painting. The process takes about two hours and requires an orbital sander, body filler, hardener, a plastic mixing board, a spreading paddle, rags, polish, auto paints, painting supplies and safety glasses.Full Answer >
To repair a heated car seat, replace any blown fuses and a faulty switch, adjust a thermister, replace or solder the heating wire, and replace the car's heater element if necessary. This procedure may, however, vary according to the cause of heat.Full Answer >