Q:

How do you repair a car that has been keyed?

A:

Quick Answer

In order to repair a car that has been keyed, sand down the area around the scratch, apply a rubbing compound and polish. Minor scratches can be repaired using a paint pen instead.

Know More

Full Answer

Removing key marks from a vehicle's paint job can be done several ways.

  1. Fix a minor scratch
  2. If the scratch caused by the keying is more serious or deeper, choose another method. Minor scratches, however, can be fixed by first washing the area around the scratch. Then, apply a coat using the paint pen, let it dry and apply further coats as necessary. Apply a clear coat if required and then polish the area using a rubbing compound.

  3. Use shoe polish
  4. If the scratch is too bad to be repaired using the method above, use shoe polish. The color of the shoe polish should contrast with the paint on the car so that it is easily visible. Apply the shoe polish to the scratch.

  5. Sand
  6. Using plenty of water, sand the area until the shoe polish disappears. The sandpaper should be 2000-grit wet/dry.

  7. Apply the rubbing compound
  8. Now apply the rubbing compound to the whole area. Buff this out being careful not to go through the layers of paint. A polishing tool can be used, but it can also be done by hand. It should be finished by hand before applying car wax to the area.

Learn more about Car Parts & Maintenance

Related Questions

  • Q:

    How do you fix a scratch on a car?

    A:

    Fix a car scratch by first tracking down your vehicle's paint code, cleaning off any dirt and then polishing and buffing the scratch. For deeper scratches, continue by wet-sanding the area, applying compound and painting until the scratch is completely filled. Avoid waxing your vehicle for approximately 30 days.

    Full Answer >
  • Q:

    How do you get scratches out of a car windshield?

    A:

    Small scratches on a windshield can be removed by the following these steps: determining the type of the scratch, purchasing the right glass repair kit, cleaning and applying a rubbing compound to the windshield and allowing the compound to dry. While this procedure is applicable to oxidation marks and small scratches, major scratches on a windshield should be handled by a professional to ensure that further damage does not occur.

    Full Answer >
  • Q:

    How do I apply rubbing compound?

    A:

    Rubbing compound is applied by spreading the compound onto a damaged painted surface using an orbital polisher with wool pad attached, according to Automagic. The compound can be used to remove light scratches in a top layer of clear-coat paint or single-layered paint, as long as the scratches do not extend completely through the layer.

    Full Answer >
  • Q:

    How do you repair a leak in a power steering pump?

    A:

    Fix a power steering pump leak by cleaning the area around the pump, locating the source of the leak, replacing or repairing the damaged component and checking for leaks. The exact process is not the same for all makes and models, but most processes involve this series of steps.

    Full Answer >

Explore