There are two effective methods to repair cigarette burns on car upholstery. Coit's carpet-cleaning, spot-removal guide shares one method that uses mayonnaise and one that uses super glue plus small fabric fibers.Know More
In the first method, Coit suggests taking a little mayonnaise and rubbing it on top of the burn hole. Allow the mayonnaise to soak in for a few minutes, and then wash it off using water and a soft cloth. The mayonnaise should clear up any marks left by the burn, but if there are any burn marks left, use a small knife to scrape them off. Next, using a small razor, cut off a piece of matching upholstery from a not easily visible area on the bottom of the car seats. Make sure the fabric matches the pattern of the burned area being covered. Using fabric glue, take the cut piece of fabric and attach it to the burned area, completely covering it.
For the second method, take a razor blade and gently scrape the seats until bits of fabric and lint start to gather. Keep these bits handy. Next, squeeze a small amount of super glue into the burned area. Place the fabric fibers on top of the super glue. After the glue is dry, the glued fabric should blend in well with the rest of the upholstery.Learn More
Begin cleaning your car upholstery by thoroughly vacuuming to remove loose dust and dirt. Next, remove stains and wipe the seats with a mixture of dish-washing liquid and water before applying conditioner.Full Answer >
To clean water stains from car upholstery, you must focus on the entire area around the stains as well as on the stains themselves. Use a high-quality dry foam cleaner to clean water stains from car upholstery.Full Answer >
A car cigarette lighter consists of a coil of nichrome wire heated until it glows by a strong electrical current. When the driver pushes in the cigarette lighter, it presses the device into an electric receptacle, allowing the current to heat the coil. Once the lighter is hot, a metallic strip bends away, allowing the device to pop back out for use.Full Answer >
Repair a leather car seat by applying a leather filler to the seat's backing with a thin implement, such as a palette knife. For deeper cracks or scars, administer multiple layers of filler. Use a grain pad to match the texture of the filler with the rest of the car seat. Finish by rubbing on a leather dye that matches the color with the surrounding leather.Full Answer >