Q:

What are the signs of a failing ignition coil?

A:

Quick Answer

The signs of a failing ignition coil include backfiring, starting issues, lowering gas efficiency, engine misfiring, vehicle stalling and worn out spark plugs. The most common symptom of a faulty ignition coil is when the car runs for a while and the engine dies abruptly. This happens when the ignition coil or module becomes too hot.

Know More
What are the signs of a failing ignition coil?
Credit: Marcelo Santos Stone Getty Images

Full Answer

The ignition coil is responsible for taking power from the battery and relaying the power to the spark plugs. This ignites the fuel and makes a car run. The severity of the symptoms of a failing ignition coil varies depending on which ignition coil is failing.

A bad ignition coil sometimes causes a vehicle to not start at all. Additionally, an automobile runs poorly and stops erratically during the drive. The vehicle also backfires when the exhaust system emits unused fuel. The way to detect this is when the exhaust emits a black smoke and smells of gasoline.

Oftentimes, problems with starting a vehicle occur due to ignition coil failures that cause the spark plugs to receive inadequate amounts of charge. It is best to run a car for 30 minutes and rap the module with a screwdriver head. The ignition coil is most likely faulty if the car engine dies.

Moreover, when a vehicle achieves fewer miles for each gallon of fuel, there is a possibility of ignition coil failure. This happens because the car uses more fuel to compensate for the insufficient power transfer.


Is this answer helpful?

Similar Questions

  • Q:

    What does an ignition coil do?

    A:

    An ignition coil is a coil in a car's ignition system that carries the 6 or 12 volts from the battery to the many volts used to spark the spark plugs in the ignition. An ignition coil is also called a spark coil, and is classified as an induction coil. All induction coils are electronic transformers that transform low-voltage pulses from the DC supply into higher voltage currents needed to spark machine engines.

    Full Answer >
  • Q:

    What is the cause of ignition coil failures?

    A:

    Ignition coil failures are caused by worn out spark plugs that fail to transmit electronic signals in a functional and fluid manner. This creates a disruption in the regular flow of power across the ignition coil and makes the engine lose power. It is less common but still possible that the rotor the ignition coil rests on breaks and reduces the function of the power circuit.

    Full Answer >
  • Q:

    How can you tell if the ignition coil is bad in a Pontiac Grand Am?

    A:

    Common signs of a failing ignition coil for a Pontiac Grand Am or other vehicle include hard starting, engine misfiring, noisy engine, stalling, backfiring and poor fuel economy. The ignition coil is an integral component of a vehicle's ignition system and responsible for supplying current to spark plugs to ignite the fuel inside the engine's combustion chamber. Malfunctioning ignition coils fail to generate sufficient voltage to fire spark plugs properly.

    Full Answer >
  • Q:

    How is an ignition coil tested?

    A:

    Although there are a number of suggested tests for the ignition coil while it is still attached to a car, the only accurate way of testing a coil is on a bench using a multimeter in the resistance setting. The ignition coil has two coils of wires, called windings. The meter quickly displays if either winding is bad.

    Full Answer >

Explore