Many things may render a car door unable to close properly, including a stiff, swollen or damaged gasket; a broken latch mechanism; or one or more loose door hinges causing the door to hang unevenly. Dirt, sticks and other debris may also be stopping the door from closing.Know More
A common cause of a car door not closing is a seized or broken door latch clasp. Locate the latch clasp on the interior edge of the car door that meets the frame of the vehicle, and ensure the latch is in a lifted, open position. If the latch clasp is closed, gently attempt to lift the latch manually using a screwdriver. The latch should spring back into the open position. If the latch does not stay open, it may be necessary to replace it.
New door gaskets may be stiff and require a little bit of wear before a car door shuts properly and without much effort. If a door gasket is torn or partially detached, it may prevent the door from shutting. Inspect the gasket for damage and replace if necessary, or apply adhesive to the rear of a detached gasket and attach the gasket to the inner door frame.
A door hanging from a loose hinge may need tightening in order to close properly and could cause additional damage. Locate the hinges for the door in question, and ensure that the door is properly hung.Learn more about Car Parts & Maintenance
To fix an oven door, remove the door from the oven, replace all worn-out hinges and broken springs, install a new rubber gasket, and reattach the door. You need a screwdriver, a knife, replacement hinges, replacement springs, pliers and a replacement gasket.Full Answer >
It usually takes two people to open a car hood with a broken latch. One person holds down the handle or lever to release the latch, while the other person pushes down on the hood to get it to pop up.Full Answer >
To fix a car window that does not roll up, remove the car door panel, and inspect the inside for misaligned tracks and wires. Test the motor, and use a voltmeter to test electrical wires. You need a panel removal tool, rubber insulated gloves, a flat-head screwdriver and a voltmeter.Full Answer >
A car's gasket is a seal that is used to cap the cylinder in the engine. The gasket acts as a lid between the engine block and the piston chamber. It is called the head gasket because it's placed on the cylinder head.Full Answer >